機械管路系統：
1、 內部管路全部為無縫不銹鋼一體成型，加熱均勻，管損小；
2、 設有泄壓回路裝置、缺水警報，保護泵浦及發熱管。
3、 升溫及降溫速度快、穩定快，空機升溫至120℃約4分鐘。
4、 循環系統水泵采用“邁浦特”高壓力高流量140℃熱水泵，導熱效果好，
模具升溫快，溫差小，節能20%以上。 臨安市壓延輥專用導熱油循環裝置 油溫加熱裝置
Mechanical piping system:
1. All the inner pipelines are made of seamless stainless steel, with uniform heating and little pipe loss;
2 、 equipped with pressure release loop, water shortage alarm, protection pump and heating pipe.
3, heating and cooling speed fast, stable and fast, empty machine heating up to 120 degrees, about 4 minutes.
4, circulation pump adopts "Maipute" high pressure high flow 140 DEG C hot water pump, thermal effect is good, Mold temperature rise, small temperature difference, energy-saving more than 20%. 油溫加熱裝置
