HAWKE防爆格蘭（501/423非鎧雙密封系列）

產品價格：	249.80/人民幣
最后更新：	2021-09-01 11:08:21
產品產地：	英國
發貨地：	上海 (發貨期：當天內發貨)
供應數量：	不限
有效期：	長期有效
最少起訂：	1
瀏覽次數：	489

公司基本資料信息

上海頤品自動化科技有限公司
張凱文先生銷售經理
會員[家家通會員產品]
郵件sales@epin-china.com
手機13818772521
電話
傳真
地址上海市金山區山陽鎮浦衛公路16393號5幢346室

產品詳細說明

HAWKE 501/423 CABLE GLANDS

HAWKE非鎧雙密封防爆格蘭（501/423系列）

HAWKE代理商:上海頤品自動化科技有限公司

Hazardous Area Cable Glands from Hawke

Hawke 501/423 cable glands provide two independent seals on non-armoured elastomer and plastic insulated cables – the first of which is a flameproof seal on the inner or outer cable sheath, with an additional IP seal on the outer sheath.

Hawke 501/423 cable glands are dual certified Exd and Exe and suitable for installation in Zone 1 (21) and Zone 2 (22) hazardous areas, 3.2-91.6mm outside cable diameters.

When used in increased safety applications the Hawke cable gland can be used to terminate braided cables where the braid and the cable outer sheath enter into the electrical enclosure or junction box.

? Exdb IIC Gb, Exeb IIC Gb, Extb IIIC, Db Non-Aromoured Cables ATEX & IECEx Cable Gland

Hawke 501/423 cable gland is suitable for cable termination and installation in Zone 1 (21), Zone 2 (22) and Division 2 hazardous areas

Flameproof Exdb
Increased Safety Exeb
Dust Extb
Dual Certified Cable Gland For Hazardous Areas ATEX – IECEx

HAWKE 501/423 CABLE GLAND TECHNICAL SPECIFICATION

Hazardous Area Cable Gland Classification – Exdb IIC Gb, Exed IIC Gb, Extb IIIC Db
Certificate No’s – Baseefa06ATEX0056X and IECEx BAS 06.0013X
Cable Gland Zone Location – Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC
Construction and Test Standards – IEC/EN 60079-0, IEC/EN 60079-1, IEC/EN 60079-7 and IEC/EN 60079-31
Ingress Protection – IP66, IP67 and IP 68 (30 metres for 7 days) to IEC/EN 60529 and NEMA 4X
Deluge Protection – DTS01
Operating Temperature Range -60°C to +100°C

CABLE GLAND SELECTION TABLE FOR HAWKE 501/423

HAWKE 501/423 CABLE GLAND SELECTION TABLE
Hawke Size Ref.	Entry Thread Size			Thread Length ‘H’	Cable Acceptance Details				‘G’ Compressed Length	Hexagon Dimensions
	Entry Thread Size				Outer Sheath ‘B’					Hexagon Dimensions
	Metric	NPT *			Standard Seal		Alternative (S) Seal			Across Flats	Across Corners
	Metric	Standard	Option		Min.	Max.	Min.	Max.		Across Flats	Across Corners
Os	M20 ?	?”	–	15.0	3.2	8.0	–	–	40.0	24.0	26.5
O	M20 ?	?”	–	15.0	6.5	11.9	–	–	40.0	24.0	26.5
A	M20	?”	?”	15.0	10.0	14.3	9.0	13.5	40.4	30.0	32.5
B	M25	1″	?”	15.0	13.0	20.2	9.5	15.4	44.3	36.0	39.5
C	M32	1?”	1″	15.0	19.5	26.5	15.5	21.2	47.2	46.0	50.5
C2	M40	1?”	1?”	15.0	25.0	32.5	22.0	28.0	49.5	55.0	60.6
D	M50	2″	1?”	15.0	31.5	44.4/42.3 ?	27.5	34.8	72.5	65.0	70.8
E	M63	2?”	2″	15.0	42.5	56.3/54.3 ?	39.0	46.5	64.8	80.0	88.0
F	M75	3″	2?”	15.0	54.5	68.2/65.3 ?	49.5	58.3	68.0	95.0	104.0
G	M80	3?”	–	20.0	67.0	73.0	–	–	68.0	106.4	115.0
H	M90	3?”	–	20.0	67.0	77.6	–	–	68.0	115.0	130.0
J	M100	4″	–	20.0	75.0	91.6	–	–	68.0	127.0	142.0

All dimensions in millimetres (except * where dimensions are in inches).
Os – F size metric entry threads are 1.5mm pitch as standard. For G size Cable Glands and above, a 2mm pitch is supplied as standard (1.5mm pitch with 15mm length of thread can be supplied) please specify when ordering.
? Smaller value is applicable when selecting reduced NPT entry option.
? Sizes Os and O are available with an M16 thread size. For O size with M16 thread, the maximum cable outer sheath diameter is 10.9 mm.

? Cembre cable lugs available to crimp and terminate cable conductors to ensure complete termination of cable.

CABLE GLAND MATERIAL & FINISH

Hawke 501/423 cable glands are manufactured in Brass (standard), Nickel Plated Brass, 316 Stainless Steel or Aluminium. Brass NPT entries are nickel plated as standard.

PREPARING CABLE & GLAND FOR INSTALLING HAWKE 501/423

Hawke 501/423 Cable & Gland Preparation

CABLE PREPARATION

Allow sufficient length of cable, II, to suit equipment. If required, fit shroud. Pass cable through cable gland as shown above. Note : If the equipment has a threaded entry, it may be advisable to screw the cable gland into the equipment to prevent twisting of the cable after Step B & C.

CABLE GLAND PREPARATION

Unless already screwed into the equipment hold the entry (3) in position with a spanner/wrench to prevent rotation and tighten the middle nut (2) using a wrench/spanner until resistance is felt between the seal and cable. Then turn the middle nut through a further half to one full turn to complete the inner seal

? Click Hawke Cable Glands to view the complete range of hazardous area glands certified according to ATEX & IECEx for Zone 1 / Zone 2.

Flameproof Exdb and Increased Safety Exeb (Dust Extb) Dual Certified glands from Hawke include – for further information review the product pages or contact us to discuss your cable gland requirements.

501/421 Cable Gland Unarmoured – outer cable sheath cable sealing
501/423 Cable Gland Unarmoured – flameproof seal to inner/outer cable sheath with IP seal on the outer sheath
501/453 Universal Cable Gland Wire Armoured Baided Steel Tape Armoured – indoor/outdoor hazardous areas
ICG 623 Barrier Gland Unarmoured – Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC hazardous areas
ICG 653 Barrier Gland Armoured – Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC hazardous areas

Hawke防爆格蘭（Hawke Cable Gland）

Hazardous Area Cable Glands-ATEX IECEX，Exe，Exd Group II

Hawke防爆格蘭代理商：上海頤品自動化科技有限公司（4008552521）

關鍵詞：Hawke防爆格蘭，Hawke防爆變徑，Hawke防爆堵頭，Hawke防爆呼吸閥，Hawke防爆接線盒，Hawke防爆控制箱

Hawke防爆格蘭等產品規格書及相關資料-請咨詢上海頤品自動化科技有限公司

在線詢盤/留言 請仔細填寫準確及時的聯系到你!

您的姓名：	您的姓名沒有寫*	預計需求數量：	* 請輸入整數 請?zhí)顚憯?shù)量
聯系手機：	*請?zhí)顚懩愕氖謾C(jī)號碼	移動電話或傳真：
電子郵件：	*郵箱格式不正確請?zhí)顚懩愕碾娮余]件	所在單位：
咨詢內容：	我想了解：《HAWKE防爆格蘭（501/423非鎧雙密封系列）》的詳細信息.請商家盡快與我聯系。 * 請?zhí)钕嚓P(guān)內容