泰揚牌Permatex冷焊膠 14600

Permatex Cold Weld Bond Compound. 14600

太陽牌冷焊膠Permatex 14600雙組分粘接填充劑，15分鐘見效，完全替代乙炔高溫焊接和銅焊。完全固化后，可在其表面鉆孔，打磨，上漆和鑿洞。能抵檔汽車，修理廠，工業等常規液體腐蝕。間隙耐溫達150度，抗剪切力高達3000PSI。建議用途鋁，銅，黃銅，青銅，修補鑄造件裂痕。

優點：焊接和熔接的另一選擇，省事省錢。

完全固化后可以鉆孔、涂漆，打磨。

耐腐蝕，修補后持久耐用。

耐溫高達華氏300度，剪切力達3000PSI,永久性修復。

使用方法:

結合表面需清洗干凈，不含油漬。并保持干爽。

擠出相等分量的修補劑和固化劑。

把兩者混合直至顏色均勻?yàn)橹埂?

涂上混合膠，再把多余的抹去。

混合后膠在4至6分鐘固化（16小時后，零件可裝配使用）

Permatex Cold Weld Bonding Compound 14600
A 15-minute, two-part adhesive and filler system that eliminates the need for welding or brazing. Once cured, it can be drilled, sanded, painted or filed. Resists most automotive, shop and cleaning fluids. Withstands temperatures to 300°F intermittent. Over 3,000 PSI shear strength on steel.
? A 15-minute, two part adhesive and filler system that eliminates the need for welding or brazing
? Once cured, it can be drilled, sanded, painted or filled
? Resists most automotive, shop and cleaning fluids
? Withstands temperatures to 300o F intermittent
? Over 3,000 PSI shear strength on steel
? For use on these suggested applications: aluminum, steel, brass, bronze, castings and stampings