河北駿豪機械設備有限責任公司

聯系人：張經理13933000298

鋼板厚度
一般好一點的3.0t的車采用的是4mm鋼板，而差一些的鋼板厚度加上油漆厚度都達不到4mm，有的甚至只能達到3mm，這樣偷工減料換來的價格優勢，對消費者是很不付責任的。這樣的車容易在后續的使用中出現故障。另外，標準型的5.0t的手動液壓車鋼板厚度也要達到8mm以上，否則很難承受如此自重。
Plate thickness
A good general 3.0T car adopts 4mm steel, and some of the thickness of the steel plate with the thickness of the paint is not up to the 4mm, some even can only reach 3mm, so Jerry in exchange for the price advantage, it is irresponsible to consumers. Such a car is prone to malfunction in subsequent use. In addition, the standard 5.0t manual hydraulic car, steel plate thickness should reach more than 8mm, otherwise it is difficult to bear such self-respect.
其實，人都是逼出來的，每個人都是有潛能的，生于憂患，死于安樂。只有今天你做了別人不愿做的付出，明天才可以擁有別人不能擁有的東西。不要擔心別人會做得比你好，與其羨慕別人，不如自己努力，你只需要每天做得都能比前一天更好一點就可以了。

每天作常規檢查，及時排除異?，F(xiàn)象，不要使用有故障的車子，以延長使用壽命。如有故障應請專業人士來排除故障，同時如要更換零部件，則零部件應由生產制造商提供。各轉動關節每三個月加馬達油一次，特別注意輪子和軸不要被雜物纏住，保持所有輪子轉動輕便，以符合安全性要求。
Routine inspection every day, in time to eliminate abnormal phenomena, do not use faulty cars, to extend the service life. If a fault occurs, a professional shall be required to troubleshoot it, and the parts shall be supplied by the manufacturer if the parts are to be replaced. Turn the joints every three months with motor oil, pay particular attention to wheels and shafts, do not be entangled with debris, keep all wheels turning light, in line with safety requirements.

人生的成功，一半要爭，一半要隨。爭，不是與他人，而是與困苦。人生最大的敵人是自己，戰勝得了自我，才能贏得了夢想。隨，不是隨波逐流，而是知止而后安。能力與條件的限制，很多人事只能隨遇而安，隨緣而止，切莫徒增煩惱。爭，人生少遺憾；隨，知足者常樂。切莫該爭時不爭，該止時不止，總在糾結中蹉跎，在蹉跎中耽擱，在耽擱中頹敗。

手動液壓車是工廠 倉庫 車間最為常用的搬運工具，因?yàn)槠湓煨秃?jiǎn)單，功能強大而美名曰“地牛”。但是這個簡單的設備也經常會出現這樣或者那樣的毛病，比如上升緩慢，下降緩慢?；蛘吒纱嗌黄饋?lái)。
Manual hydraulic car is the most commonly used tools for handling the factory warehouse workshop, because of its simple shape, powerful and beautiful name "cattle". But this simple device often suffers from one or the other, such as rising slowly and slowing down slowly. Or I can't raise it.