BRONKHORST  FS-201CV-500-AGD-00-V 流量計

MVP 48.53 53,70 G 3.28 250 G 3600 2500
MVP 60.60 60,00 G 3.66 280 G 4050 3000
MVP 60.72 72,00 G 4.39 280 G 4050 2700
MVP 60.84 84,70 G 5.17 250 G 3600 2300
MVPD cm3/rev G in3/rev bar G psi min?1
MVPD 30.34 34,00 G 2.07 230 G 3350 3700
MVPD 30.45 45,00 G 2.75 230 G 3350 3500
MVPD 48.60 60,00 G 3.66 230 G 3350 2600
Features MVPD 48.65 65,00 G 3.97 230 G 3350 2800
Exceptional working life expectancy
Low noise emission
Drive shaft bearing suitable for radial and axial loads
Multiple combinations
Short response time
MVPD additional features
Higher speed
Higher power-to-weight ratio
Cost-optimized design
Controls
Min. and max. displacement limiter
Pressure compensator
Flow and pressure compensator (Load?Sensing)
Torque limiter
Electronic controls
DOC 03 R A 21
Variable displacement axial piston pumps
TVP series
Variable displacement axial piston pumps swash plate design ideally suited for open circuit truck applications.
The compact design allows to be mounted directly on the PTOs.
Displacements from 60,0 cm3/rev G 3.66 in3/rev to 84,7 cm3/rev G 5.17 in3/rev.
Max. peak pressure up to 400 bar G 5800 psi.
Max. speed up to 3000 min?1.
Main characteristics
Max
displacement
Max. continuous
 pressure
Max. speed
TVP cm3/rev G in3/rev bar G psi min?1
TVP 60.60 60,00 G 3.66 350 G 5100 3000
TVP 60.72 72,00 G 4.39 350 G 5100 2700
TVP 60.84 84,70 G 5.17 350 G 5100 2500
Features
Pump internal drain line
Compensators external drain line
Direct mounting on the PTOs
Body width 124,2 mm (4.8898 in)
Compact design
Low noise emission
Controls
Min. and max. displacement limiter
Flow and pressure compensator (Load?Sensing)
Electro-proportional pressure compensator
22 DOC 03 R A
Variable displacement axial piston pumps
PLATA SVP ? DVP series
Variable displacement axial piston pumps swash plate design for open circuit applications. SVP single flow, DVP dual
flow on piston pump and an additional piggybacked gear pump. The automatic overall torque limiter allows to optimize the
performance of themachine. SVP and DVP pumps has been designed specifically for mini excavators where compactness
and ease of installation are critical.
Piston pump: displacements from 7,8 cm3/rev G 0.48 in3/rev to 30 cm3/rev G 1.83 in3/rev.
Gear pump: displacements from 4,95 cm3/rev G 0.30 in3/rev to 21,14 cm3/rev G 1.29 in3/rev.
Max. speed up to 2600 min?1.
Main characteristics
Max
displacement
Max. continuous
               
03590203            PUMP PLP30.51S0-04S5-LGF/GF-N                                                                     
03590204             PUMP PLP30.61D0-04S5-LGG/GF-N                                                                     
03590205             PUMP PLP30.27S0-04S5-LGF/GF-N                                                                     
03590206             PUMP PLP30.27D0-04S5-LGF/GF-N                                                                     
03590207             PUMP PLP30.22S0-04S5-LGF/GF-N                                                                     
03590208             PUMP PLP30.22D0-04S5-LGF/GF-N                                                                     
03590209             PUMP PLP30.38D0-04S5-LGF/GF-N                                                                     
03590210             PUMP PLP30.38S0-04S5-LGF/GF-N                                                                     
03590211             PUMP PLP30.43D0-04S5-LGF/GE-N                                                                     
03590212             PUMP PLP30.73D0-04S5-LGG/GF-N                                                                     
03590216             PUMP PLP30.61D0-04S5-LEF/ED-N                                                                     
0359021J             PUMP PLP30.51R0-04S5-LOG/OF-N                                                                     
0359021X             PUMP PLP30.27D0-32E3-LGF/GF-N-FS