Simotop T1A 112M-4  4KW

210083
125 80 - 125 750 - 1500 NZM7-125N-NA-M8
207839
150 125 - 150 960 - 1900 NZM7-150N-NA-M8
210085
High Interrupting Capacity 50 kA at 480 V 50/60 Hz
22 kA at 600 V 50/60 Hz
With adjustable thermal setting and pressure wire terminals
40 25 - 40 380 100 50 22 NZM7-40S-NA
220961
63 40 - 63 378 - 760 NZM7-63S-NA
220962
80 63- 80 480 - 960 NZM7-80S-NA
220963
100 80 - 100 600 - 1200 NZM7-100S-NA
220964
125 80 - 125 750 - 1500 NZM7-125S-NA
220965
150 125 - 150 960 - 1900 NZM7-150S-NA
220966
With adjustable thermal setting and provisions for bolt-on connection
40 25 - 40 380 100 50 22 NZM7-40S-NA-M8
220967
63 40 - 63 378 - 760 NZM7-63S-NA-M8
220968
80 63 - 80 480 - 960 NZM7-80S-NA-M8
220969
100 80 - 100 600 - 1200 NZM7-100S-NA-M8
220970
125 80 - 125 750 - 1500 NZM7-125S-NA-M8
220971
150 125 - 150 960 - 1900 NZM7-150S-NA-M8
220972
Notes:
1) Type NZM7-...N(S)-NA(-M8) molded-case circuit breakers are UL listed (UL 489) and CSA certified (22.2 No.. 5.1) Inverse Time, 150A Thermal-magnetic
Trip Circuit Breakers with an adjustable thermal trip feature and an adjustable magnetic trip function (In breakers rated 25 to 40A, the magnetic
trip function is fixed at 380A.
2) NZM7-..N(S)-NA molded case circuit breakers and NZM7-...-NA molded case switches are supplied as standard with pressure wire terminals to accept
cable connection, but are also suitable for bolt-on connections using crimped lugs or straight lengths of Cu busbar (type suffix "-M8").
Notes
Accessories Page
1 Auxiliary contacts 09/014
2 Voltage trips 09/016
3 Handles and operators 09/022
4 Terminals 09/028
Other accessories 09/022
3
3
3
2
1
4
09/012 09/013
Ampere
Rating
Type
Article No.Inverse Time Circuit Breakers, 150A, 600V AC
Thermal-magnetic Type NZM 7...-NA
Circuit Breakers,
Disconnect S
witches, Molded Case Switches
Circuit Breakers,
Disconnect Switches, Molded Case Switches
Inverse Time Circuit Breakers, 150A, 600V AC
Thermal-magnetic Type NZM7...-NA
UL / CSA ; IEC / EN 60 947-2 ; CE UL / CSA ; IEC / EN 60 947-2 ; CE
Moeller Electric Corporation Moeller Electric Corporation
Normal Interrupting Capacity 25 kA at 480 V 50/60 Hz High Interrupting Capacity 50 kA at 480 V 50/60 Hz
 14 kA at 600 V 50/60 Hz 22 kA at 600 V 50/60 Hz
Fuseless current-limiting
circuit breaker
Continuous
Current
Rating
Fixed Thermal
Setting
Magnetic Trip
Setting for
Instantaneous
Response
UL/CSA Interrupting Ratings
(AC, 60Hz)
kA RMS symmetrical @
Type Price UL/CSA Interrupting Ratings
(AC, 60Hz)
kA RMS symmetrical @
Type Price
Article No. see price list Article No. see price list
u
A A A 240V 480V 600V 240V 480V 600V
With fixed thermal setting and pressure wire terminals
40 25 380 65 25 14 NZM7A-25N-NA
208658
100 50 22 NZM7A-25S-NA
220936
30 380 NZM7A-30N-NA
208659
NZM7A-30S-NA
220937
35 380 NZM7A-35N-NA
208660
NZM7A-35S-NA
220938
40 380 NZM7A-40N-NA
208661
NZM7A-40S-NA
220939
60 50 378 - 760 NZM7A-50N-NA
208662
NZM7A-50S-NA
220940
60 378 - 760 NZM7A-60N-NA
208663
NZM7A-60S-NA
220941
80 70 480 - 960 NZM7A-70N-NA
208664
NZM7A-70S-NA
220942
80 480 - 960 NZM7A-80N-NA
208665
NZM7A-80S-NA
220943
100 90 600 - 1200 NZM7A-90N-NA
208666
NZM7A-90S-NA
220944
100 600 - 1200 NZM7A-100N-NA
208667
NZM7A-100S-NA
220945
125 125 750 - 1500 NZM7A-125N-NA
208668
NZM7A-125S-NA
220946
150 150 960 - 1900 NZM7A-150N-NA
210086
NZM7A-150S-NA
220947
With fixed thermal setting and provisions for bolt-on connection
40 25 380 65 25 14 NZM7A-25N-NA-M8
208669
100 50 22 NZM7A-25S-NA-M8
220948
30 380 NZM7A-30N-NA-M8
208670
NZM7A-30S-NA-M8
220949
35 380 NZM7A-35N-NA-M8
208671
NZM7A-35S-NA-M8
220950
40 380 NZM7A-40N-NA-M8
208672
NZM7A-40S-NA-M8
220951
60 50 378 - 760 NZM7A-50N-NA-M8
208673
NZM7A-50S-NA-M8
220952
60 378 - 760 NZM7A-60N-NA-M8
208674
NZM7A-60S-NA-M8
220953
80 70 480 - 960 NZM7A-70N-NA-M8
208675
NZM7A-70S-NA-M8
220954
80 480 - 960 NZM7A-80N-NA-M8
208676
NZM7A-80S-NA-M8
220955
100 90 600 - 1200 NZM7A-90N-NA-M8
208677
NZM7A-90S-NA-M8
220956
100 600 - 1200 NZM7A-100N-NA-M8
208678
NZM7A-100S-NA-M8
220957
125 125 750 - 1500 NZM7A-125N-NA-M8
208679
NZM7A-125S-NA-M8
220958
150 150 960 - 1900 NZM7A-150N-NA-M8
210087
NZM7A-150S-NA-M8
220959
Notes:
1) Type NZM7A-...N(S)-NA(-M8) molded-case circuit breakers are UL listed (UL 489) and CSA certified (22.2 No.. 5.1) Inverse Time, 150A Thermalmagnetic
Trip Circuit Breakers with a fixed thermal trip feature and an adjustable magnetic trip function (In breakers rated 25 to 40A, the magnetic
trip function is fixed at 380A).
2) NZM7A-..N(S)-NA are supplied as standard with pressure wire terminals to accept cable connection, but are also suitable for bolt-on connections using
crimped lugs or straight lengths of Cu busbar (type suffix "-M8").
Notes
Accessories Page
1 Auxiliary contacts 09/014
2 Voltage trips 09/016
3 Handles and operators 09/022
4 Terminals 09/028
Other accessories 09/022
3
3
3
2
1
4
09/010 09/011
1-866-595-9616
1-630-595-9515 Go to: http://www.klocknermoeller.com
Inverse Time Circuit Breakers, 150A, 600V AC
Thermal-magnetic Type NZM 7...-NA
Circuit Breakers,
Disconnect S
witches, Molded Case Switches
Circuit Breakers,
Disconnect Switches, Molded Case Switches
Inverse Time Circuit Breakers, 150A, 600V AC
Thermal-magnetic Type NZM7...-NA
UL / CSA ; IEC / EN 60 947-2 ; CE UL / CSA ; IEC / EN 60 947-2 ; CE
Moeller Electric Corporation Moeller Electric Corporation
Normal Interrupting Capacity 25 kA at 480 V 50/60 Hz High Interrupting Capacity 50 kA at 480 V 50/60 Hz
 14 kA at 600 V 50/60 Hz 22 kA at 600 V 50/60 Hz
Fuseless current-limiting
circuit breaker
Continuous
Current
Rating
Fixed Thermal
Setting
Magnetic Trip
Setting for
Instantaneous
Response
UL/CSA Interrupting Ratings
(AC, 60Hz)
kA RMS symmetrical @
Type Price UL/CSA Interrupting Ratings
(AC, 60Hz)
kA RMS symmetrical @
Type Price
Article No. see price list Article No. see price list
u
A A A 240V 480V 600V 240V 480V 600V
With fixed thermal setting and pressure wire terminals
40 25 380 65 25 14 NZM7A-25N-NA
208658
100 50 22 NZM7A-25S-NA
220936
30 380 NZM7A-30N-NA
208659
NZM7A-30S-NA
220937
35 380 NZM7A-35N-NA
208660
NZM7A-35S-NA
220938
40 380 NZM7A-40N-NA
208661
NZM7A-40S-NA
220939
60 50 378 - 760 NZM7A-50N-NA
208662
NZM7A-50S-NA
220940
60 378 - 760 NZM7A-60N-NA
208663
NZM7A-60S-NA
220941
80 70 480 - 960 NZM7A-70N-NA
208664
NZM7A-70S-NA
220942
80 480 - 960 NZM7A-80N-NA
208665
NZM7A-80S-NA
220943
100 90 600 - 1200 NZM7A-90N-NA
208666
NZM7A-90S-NA
220944
100 600 - 1200 NZM7A-100N-NA
208667
NZM7A-100S-NA
220945
125 125 750 - 1500 NZM7A-125N-NA
208668
NZM7A-125S-NA
220946
150 150 960 - 1900 NZM7A-150N-NA
210086
NZM7A-150S-NA
220947
With fixed thermal setting and provisions for bolt-on connection
40 25 380 65 25 14 NZM7A-25N-NA-M8
208669
100 50 22 NZM7A-25S-NA-M8
220948
30 380 NZM7A-30N-NA-M8
208670
NZM7A-30S-NA-M8
220949
35 380 NZM7A-35N-NA-M8
208671
NZM7A-35S-NA-M8
220950
40 380 NZM7A-40N-NA-M8
208672
NZM7A-40S-NA-M8
220951
60 50 378 - 760 NZM7A-50N-NA-M8
208673
NZM7A-50S-NA-M8
220952
60 378 - 760 NZM7A-60N-NA-M8
208674
NZM7A-60S-NA-M8
220953
80 70 480 - 960 NZM7A-70N-NA-M8
208675
NZM7A-70S-NA-M8
220954
80 480 - 960 NZM7A-80N-NA-M8
208676
NZM7A-80S-NA-M8
220955
100 90 600 - 1200 NZM7A-90N-NA-M8
208677
NZM7A-90S-NA-M8
220956
100 600 - 1200 NZM7A-100N-NA-M8
208678
NZM7A-100S-NA-M8
220957
125 125 750 - 1500 NZM7A-125N-NA-M8
208679
NZM7A-125S-NA-M8
220958
150 150 960 - 1900 NZM7A-150N-NA-M8
210087
NZM7A-150S-NA-M8
220959
Notes:
1) Type NZM7A-...N(S)-NA(-M8) molded-case circuit breakers are UL listed (UL 489) and CSA certified (22.2 No.. 5.1) Inverse Time, 150A Thermalmagnetic
Trip Circuit Breakers with a fixed thermal trip feature and an adjustable magnetic trip function (In breakers rated 25 to 40A, the magnetic
trip function is fixed at 380A).
2) NZM7A-..N(S)-NA are supplied as standard with pressure wire terminals to accept cable connection, but are also suitable for bolt-on connections using
crimped lugs or straight lengths of Cu busbar (type suffix "-M8").
Notes
Accessories Page
1 Auxiliary contacts 09/014
2 Voltage trips 09/016
3 Handles and operators 09/022
4 Terminals 09/028
Other accessories 09/022
3
3
3
2
1
4
09/010 09/011
1-866-595-9616
1-630-595-9515 Go to: http://www.klocknermoeller.com
Inverse Time Circuit Breakers, 150A, 600V AC
Thermal-magnetic Type NZM 7...-NA
Circuit Breakers,
Disconnect S
witches, Molded Case Switches
Circuit Breakers,
Disconnect Switches, Molded Case Switch
UL / CSA ; IEC / EN 60 947-2 ; CE Molded Case Switches, 200A, 600V AC UL / CSA ; IEC / EN 60 947-3 ; CE
es
Moeller Electric Corporation Moeller Electric Corporation
Normal Interrupting Capacity 25 kA at 480 V 50/60 Hz
14 kA at 600 V 50/60 Hz
Continuous
Current
Rating
Adjustable
Thermal Setting
Magnetic Trip
Setting for
Instantaneous
Response
UL/CSA Interrupting Ratings
(AC, 60Hz)
kA RMS symmetrical @
Type Price
Article No. see price list
u
A A A 240V 480V 600V
With adjustable thermal setting and pressure wire terminals
40 25 - 40 380 65 25 14 NZM7-40N-NA
210076
63 40 - 63 378 - 760 NZM7-63N-NA
210077
80 63 - 80 480 - 960 NZM7-80N-NA
210078
100 80 - 100 600 - 1200 NZM7-100N-NA
210079
125 80 - 125 750 - 1500 NZM7-125N-NA
207875
150 125 - 150 960 - 1900 NZM7-150N-NA
210084
With adjustable thermal setting and provisions for bolt-on connection
40 25 - 40 380 65 25 14 NZM7-40N-NA-M8
210080
63 40 - 63 378 - 760 NZM7-63N-NA-M8
210081
80 63 - 80 480 - 960 NZM7-80N-NA-M8
210082
100 80 - 100 600 - 1200 NZM7-100N-NA-M8
210083
125 80 - 125 750 - 1500 NZM7-125N-NA-M8
207839
150 125 - 150 960 - 1900 NZM7-150N-NA-M8
210085
High Interrupting Capacity 50 kA at 480 V 50/60 Hz
22 kA at 600 V 50/60 Hz
With adjustable thermal setting and pressure wire terminals
40 25 - 40 380 100 50 22 NZM7-40S-NA
220961
63 40 - 63 378 - 760 NZM7-63S-NA
220962
80 63- 80 480 - 960 NZM7-80S-NA
220963
100 80 - 100 600 - 1200 NZM7-100S-NA
220964
125 80 - 125 750 - 1500 NZM7-125S-NA
220965
150 125 - 150 960 - 1900 NZM7-150S-NA
220966
With adjustable thermal setting and provisions for bolt-on connection
40 25 - 40 380 100 50 22 NZM7-40S-NA-M8
220967
63 40 - 63 378 - 760 NZM7-63S-NA-M8
220968
80 63 - 80 480 - 960 NZM7-80S-NA-M8
220969
100 80 - 100 600 - 1200 NZM7-100S-NA-M8
220970
125 80 - 125 750 - 1500 NZM7-125S-NA-M8
220971
150 125 - 150 960 - 1900 NZM7-150S-NA-M8
220972
Notes:
1) Type NZM7-...N(S)-NA(-M8) molded-case circuit breakers are UL listed (UL 489) and CSA certified (22.2 No.. 5.1) Inverse Time, 150A Thermal-magnetic
Trip Circuit Breakers with an adjustable thermal trip feature and an adjustable magnetic trip function (In breakers rated 25 to 40A, the magnetic
trip function is fixed at 380A.
2) NZM7-..N(S)-NA molded case circuit breakers and NZM7-...-NA molded case switches are supplied as standard with pressure wire terminals to accept
cable connection, but are also suitable for bolt-on connections using crimped lugs or straight lengths of Cu busbar (type suffix "-M8").
Notes
Accessories Page
1 Auxiliary contacts 09/014
2 Voltage trips 09/016
3 Handles and operators 09/022
4 Terminals 09/028
Other accessories 09/022
3
3
3
2
1
4
09/012 09/013
Ampere
Rating
Type
Article No.
Price
see price list
A
With pressure wire terminals for cable connection
60 NZM7-60-NA
205580
100 NZM7-100-NA
205581
125 NZM7-125-NA
205582
150 NZM7-150-NA
207600
200 NZM7-200-NA
215430
With provisions for bolt-on connections
60 NZM7-60-NA-M8
205584
100 NZM7-100-NA-M8
205585
125 NZM7-125-NA-M8
205586
150 NZM7-150-NA-M8
207601
200 NZM7-200-NA-M8
205588
Notes:
UL/CSA Short Circuit Current Rating for Molded Case Switches
with 225A fuse backup:
? 50 kA RMS sym at 600 V AC
with 250A circuit breaker backup:
? 25 kA RMS sym at 480 V AC
? 18 kA RMS sym at 600 V AC
NZM7-...-NA(-M8) molded case switches are virtually identical in construction to the molded case circuit breakers,
except that they are manual, non-automatic switches without any overload or overcurrent protective features,
and are rated up to 200A.
All molded case switches are UL listed (UL 489) and CSA certified (C 22.2 Nr. 5.2). They are also in conformity
with IEC/EN 60 947-3 (switch-disconnectors) and are CE marked. Consult techncial data and Moeller Electric
for IEC/EN ratings. Molded case switches are tested to determine their acceptability for continuous operation at
their marked rated load. Also, they are tested at 6 times their full ampere rating to cover motor circuit applications
and are suitable for use as motor circuit disconnects per Section 430-109 of the NEC and Section 28-602
of the CEC.
1-866-595-9616
1-630-595-9515 Go to: http: MATERIAL # DESCRTPTION ON HAND COST EXTENDED
10010310 SWITCH,PROX,10-40VDC,OMRON,NPN,NO, 10 $ 43.88 $ 438.80
10051467 UNIT,AC DOOR,REFURBISHED.TRUMPF, 147499 1 $ 1,046.10 $ 1,046.10
10051918 SWITCH,PRESSURE,BIMBA,VACUUM, 4 $ 72.35 $ 289.40
10056390 PARTS,5 CERAMIC.MAZAK CORP 5 $ 434.06 $ 2,170.30
10056399 BRACKET,FIXING,FOR LASER.TRUMPF, XSZB108 14 $ 0.69 $ 9.66
10059421 NOZZLE,LASER,1.0 MM 7 $ 20.39 $ 142.71
10084865 MIRROR,BENDING,2 X 4 .TRUMPF, 133348 1 $ 185.00 $ 185.00
10084866 HOLDER,SENSOR BODY 1 $ 83.16 $ 83.16
10084937 O-RING 2 $ 0.90 $ 1.80
10084947 FILTER,INLINE 1 $ 7.00 $ 7.00
10087423 SENSOR,PRE-AMPLIFIER,SLIM BODY.TRUMPF 1 $ 935.55 $ 935.55
10089118 FILTER,AIR ELEMENT,FFP.TRUMPF, 377006 3 $ 123.29 $ 369.88
10089119 FILTER,AIR ELEMENT,SMFP.TRUMPF, 123675 2 $ 79.38 $ 158.76
10089120 FILTER,AIR,ELEMENT.TRUMPF, 377004 2 $ 196.74 $ 393.47
10099426 NOZZLE,LASER,1.4 MM,CENTRICUT 6 $ 4.13 $ 24.75
2001224 SWITCH,PROX,BALLUFF,INDUCT.BALLUFF 2 $ 90.62 $ 181.24
2017014 REAR MIRROR (REFILLED/REFURB) 1204605R 2 $ 824.00 $ 1,648.00
25047 LAMP,LED,24VDC,15 MM LG,RED.STL627-01-01 7 $ 19.49 $ 136.46
29495 STARTER,LAMP,FLUORESCENT LAMP 3 $ 1.64 $ 4.92
49464 SHOCK ABSORBER,ACECONTROL.ACE CONTROL 4 $ 126.35 $ 505.40
51582 LAMP,LED,24V,RED,INDICATOR.S-DB-24-79 3 $ 9.25 $ 27.75
53891 SWITCH,TOGGLE,SELECTASWITCH 1 $ 2.20 $ 2.20
54618 FILTER,ELEMENT 24 $ 2.01 $ 48.24
54974 LENS,HIGH PRESSURE,5.0 .TRUMPF, 0088114 2 $ 356.47 $ 712.94
54979 FITTING,STRAIGHT SCREW IN LASER.TRUMPF 2 $ 1.71 $ 3.42
55028 CABLE,TRUMPF 2 $ 87.40 $ 174.80
56238 CABLE,TRUMPF,190 MM LG,H/R BOTTOM 1 $ 179.55 $ 179.55
56241 SENSOR,BODY,SLIM.TRUMPF, 0913963 1 $ 1,408.05 $ 1,408.05
56334 HOSE,TEFLON,RF.TRUMPF, 0078846 4 $ 54.17 $ 216.68
56336 ANODE,SACRIFICIAL.TRUMPF, 1386020 4 $ 425.25 $ 1,701.00
56339 KIT,LENS CLEANING.MAZAK CORP., 911466 2 $ 105.00 $ 210.00
56542 MIRROR,DEVIATING.096066 23 $ 117.64 $ 2,705.72
56558 CAPACITOR,DISC,C5 END STAGE.TRUMPF 1 $ 474.88 $ 474.88
56573 METER,CALORIMETER,0-2000W(3) 1 $ 915.00 $ 915.00
56977 SENSOR,BODY CAP SLIM.913965 1 $ 85.05 $ 85.05
57472 SWITCH,FLOW,TRUMPF,11 L 4 $ 450.00 $ 1,800.00
60488 SWITCH,EMERGENCY STOP,SIEMENS 1 $ 43.20 $ 43.20
61235 DRIVE,COMMANDER SE.23400075 6 $ 560.00 $ 3,360.00
61428 EJECTOR,VACUUM.AIRLINE HYDRAULICS 2 $ 25.39 $ 50.78
62626 VALVE,THERM EXPANSION.0342045 3 $ 326.59 $ 979.77
63702 BELT,V,1032SPA1482,METRIC.AMETRIC 3 $ 8.95 $ 26.85
64227 LAMP,LED,24V 16 $ 3.60 $ 57.64
56556 KIT,END STAGE TUBE.TRUMPF, 1800928 2 $ 6,500.00 $ 13,000.00
Value $ 36,915.88
Spare Parts for Trumpf CNC 5-Axis Laser - Model Lasercell 1005
Price
see price list
A
With pressure wire terminals for cable connection
60 NZM7-60-NA
205580
100 NZM7-100-NA
205581
125 NZM7-125-NA
205582
150 NZM7-150-NA
207600
200 NZM7-200-NA
215430
With provisions for bolt-on connections
60 NZM7-60-NA-M8
205584
100 NZM7-100-NA-M8
205585
125 NZM7-125-NA-M8
205586
150 NZM7-150-NA-M8
207601
200 NZM7-200-NA-M8
205588
Notes:
UL/CSA Short Circuit Current Rating for Molded Case Switches
with 225A fuse backup:
? 50 kA RMS sym at 600 V AC
with 250A circuit breaker backup:
? 25 kA RMS sym at 480 V AC
? 18 kA RMS sym at 600 V AC
NZM7-...-NA(-M8) molded case switches are virtually identical in construction to the molded case circuit breakers,
except that they are manual, non-automatic switches without any overload or overcurrent protective features,
and are rated up to 200A.
All molded case switches are UL listed (UL 489) and CSA certified (C 22.2 Nr. 5.2). They are also in conformity
with IEC/EN 60 947-3 (switch-disconnectors) and are CE marked. Consult techncial data and Moeller Electric
for IEC/EN ratings. Molded case switches are tested to determine their acceptability for continuous operation at
their marked rated load. Also, they are tested at 6 times their full ampere rating to cover motor circuit applications
and are suitable for use as motor circuit disconnects per Section 430-109 of the NEC and Section 28-602
of the CEC.
1-866-595-9616
1-630-595-9515 Go to: http://www.klocknermoeller.com2-Electrode conductivity cells 011010A and 011010 are glass/platinum, have a nominal cell constant of 1.0cm-1 and are intended for laboratory use; measurement range is 1μS/cm to 200mS/cm.
2-Electrode conductivity cells 011020A, 011020 and 9902BN are glass/platinum, have a nominal cell constant of 0.1cm-1 and are intended for laboratory use and ultra pure water; measurement range is 0.1μS/cm to 100μS/cm.
2-Electrode conductivity cells 011050MD, 011050A and 011050 are epoxy/platinum, have a nominal cell constant of 1.0cm-1 and are intended for field or laboratory use; measurement range is 1μS/cm to 20mS/cm.
2-Electrode conductivity cells 011510MD and 011510are epoxy/graphite, have a nominal cell constant of 1.0cm-1 and are intended for field or laboratory use; measurement range is 10μS/cm to 200mS/cm.
2-Electrode conductivity cells 013016MD, 013016A and 013016D are steel (V4A), have a nominal cell constant of 0.1cm-1 and are intended for laboratory use and ultra pure water; measurement range is 0.01μS/cm to 300μS/cm
2-Electrode conductivity cell 018020MD is glass/platinum, has a nominal cell constant of 10cm-1 and is intended for high electrolyte concentration solutions; measurement range is 10μS/cm to 2000mS/cm.
Recommended for:
Intended for laboratory and field use
- See more at: http://www.thermoscientific.com/en/product/orion-two-electrode-conductivity-cells.html#sthash.3dGq2qv6.dpufShowing 1- 5 10 of 10 Products | 
Show All
Catalog #Measurement RangesConnector TypesFor Use WithQuantity011510
10μS/cm to 20mS/cm8 pin DIN150Aplus, 145Aplus, 125Aplus, 115Aplus, 105Aplus meters
Full specifications

1
REQUEST QUOTE
011010
1μS/cm to 200mS/cmCable: 8 pin DIN150Aplus, 145Aplus, 125Aplus, 115Aplus, 105Aplus meters
Full specifications

1
REQUEST QUOTE
011010A
1μS/cm to 200mS/cmCable: 8 pin Waterproof DIN555A, 550A, 162A, 136A, 135A, 131S, 130A meters
Full specifications

1
REQUEST QUOTE
011020
0.1μS/cm to 100mS/cmCable: 8 pin DIN150Aplus, 145Aplus, 125Aplus, 115Aplus, 105Aplus meters
Full specifications

1
REQUEST QUOTE
011050
1μS/cm to 20mS/cmCable: 8 pin DIN150Aplus, 145Aplus, 125Aplus, 115Aplus, 105Aplus meters
- See more at: http://www.thermoscientific.com/en/product/orion-two-electrode-conductivity-cells.html#sthash.3dGq2qv6.dpufShowing 1- 4 4 of 4 Products
Catalog #DescrtptionThermo Orion Code DS&M Item Unit Descrtption  

100025 H2500C-45C EA SENSOR, ION SELECTIVE, CHLORIDE, HALF CELL,  12MMX120MM - USE ON THERM ORION CHLORIDE 2117,1817,1517 PAIRS WITH H5600-45C REFERENCE ELECTRODE 

100045 H4500C-45C EA SENSOR, ION SELECTIVE, SODIUM BULB 12MMX110MM, GLASS, HALF CELL - PAIRS WITH H5600-45C REF ELEC   
100048 H4800C-45C EA SENSOR, ION SELECTIVE, SODIUM, HALF CELL BULB 12MMX108MM WITH 0.730" WASHER-PAIRS WITH H5800-45C REF ELEC 

100056 H5600C-45C EA ELECTRODE, DJ, SIDE ARM REFERENCE - 12MMX108MM F/USE ON 1811lLL-PAIRS WITH H4500-45 SENSOR ELEC & H2500C-45   
100058 H5800C-45C EA ELECTRODE, DJ, REFERENCE, 12MMX108MM, SIDE ARM, -F/USE ON 1811EL- PAIRS WITH H4800-45C SENSOR ELEC 

150060 T3057-45 4ft DIFFUSION TUBING ONLY 4' w/3-O-rings-(thick walled) and THREE(3) O-Rings (Series1800)
*** Ships with E3057-6L  33% Ethylamine    
150061 T3061-45 3ft. DIFFUSION TUBING  3 ft.  (thin-walled) and (3) O-Rings for Orion 1517 Chloride 
***  Ships with F5710-6L Formic Acid when 1517 specified by customer   
150071 150071 2oz. FILLING SOLUTION 100031/100046 REFERENCE ELECTRODE - Potassium Chloride 15% Triton X-100 <0.1 % - 1.1 s.g. 

  
150072 C5857-45 5x2oz Cesium Bromide, 0.1M Electrode[100058] Fill Solution Orion Sodium Analyzer-5x2oz. 

151111 E3057-6L     CS/6
Six(6) HDPE 63mm leakproof closure - 872mL Fill, and six(6) T3057-45 [150060]Diffusion Tubing 4 FT Length (thick-walled) and O-Rings(3) 1800 Series ***    
151711  F5710-6L   
CS/6
Chloride Reagent (formic acid) with tubing - for use on Thermo OrionChloride Analyzer Model(s):2117,1817,1517 ***same as 182011
  
151811 see D3018-6L  see 181811          Oxygen Scavenger Reagent(Hydrazine Diffusion Reagent)Reagent w/Tubing4 Bottles
  
157011     Chlorine reagent w/tubing 4Bottles
  
177011
A17705-45 KIT  .. ACETIC ACID 2.36% SOLUTION, TOTAL RESIDUAL CHLORINE REAGENT KIT, 900mL Size, w/Pre-weighed Potassium Iodide ACS  in 30cc bottle

180823 180823 
PART OF 180821 & 180822 :::POTASSIUM HYDROXIDE Internal Fill Solution [KOH 5%] 1.01 s.g. :::   
          

  
181030 181030     
Acetic acid reagent for 1810AO Ammonia Monitor, ***CALL FOR PRICE
  
181060 T3060-45 EA DIFFUSION TUBING  2 ft. Length (thin-walled) with (3) O-Rings for Orion 2117XP & 1817LL/HL Chloride *** Ships with F5710-6L Formic Acid Reagent
  
181073 C5657-45 5x2oz Cesium Chloride, 16.8% W/V(1M) Electrode[100056] Fill Solution -Orion Sodium Analyzer-5x2oz   
181073 C5657-60ML 2oz Cesium Chloride, 1M Electrode Fill Solution [for 100056 ref electrode] - FD&C #40(colorant) ADDED - SOLD in 5x2ozPK *SEE C5657-45   
181101 H5848-45 KIT Electrode Kit 1811EL Sodium ($853 Orion)Electrode pair,etchant & fill solution   
181111  E3057-6L  6x1L w/4'DT  18111 is single bottle only monoethylamine($171 Orion) see also 151111 & 150060
 *** E3057-6L replaces  6x1L w/4' Diffusion Tubing Kit   
181113 S5957-60ML 2oz 0.1M HF ETCH Solution for Cleaning Reference Electrodes - 2oz [ORION 181113] *ORDER BY EACH, ALSO INCLUDED WITH S181140-45 & S181141-45 

181113 S5957-45 5x2oz Sodium Fluoride, 0.5% in 6% Acetic Acid Solution - ETCH SOL/Orion/Na - 5x2oz.   
181121 T181121-45 Kit O-Ring Kits, 1800 Series, (5)five sets of assorted O-rings   

181123 181123 EA Pressure valve assy

181125 T181125-45 EA Restriction Tube Assembly (for Orion 1800 Series)[Included with Annual Kit(s)]   
181130 A3045XPH-12L 6X2L Ammonium Hydroxide, ACS  [6x1.87L/CS] in 2L Rect Btl - Packaged with (6) T3058-45 -Diffusion Tubing 5'8"(thin-walled):

181140 S181140-45 PK/5x2oz SODIUM CALIBRATION LOW KIT| 2x2oz "STANDARD 1" - 19.1ppM Na,   2x2oz "STANDARD 2"- 192.1ppM Na,  and 2oz Electrode Etch Solution[S5957-60ML]   
181140 S1811L-45 2x2oz SODIUM LOW "STANDARD 1"-19.1ppM Na, 2oz 

181140 S1812L-45 2x2oz SODIUM LOW "STANDARD 2"-192.1ppM Na, 2oz   
181141 S181141-45 PK/5x2oz SODIUM CALIBRATION HIGH KIT - Incl.:2x2oz  "STANDARD 1" - 1910 ppM Na,   2x2oz "STANDARD 2"- 19200 ppM Na,  and 2oz Electrode Etch Solution[S5957-60ML]   
181141 S1811H-45 2x2oz SODIUM HIGH "STANDARD 1"-1910 ppM Na, 2oz 

181141 S1812H-45 2x2oz SODIUM HIGH "STANDARD 2"-19200 ppM Na, 2oz   
181153 S181156-45 KIT ANNUAL CONSUMABLES KIT FOR ORION 1811LL ANALYZER W/100056/45 ELECTRODE PAIR & MONOETHYLAMINE BUFFER   
181150 S181156A-45 KIT ANNUAL CONSUMABLES KIT FOR ORION 1811LL SODIUM ANALYZER W/100056/45 ELECTRODE PAIR & AMMONIUM HYDROXIDE BUFFER
***Packaging difference: 6x1L
for 2L package see A3045XPL-12L and  A3045XPH-12L

181160 T3058-45 68 in DIFFUSION TUBING  5'8" (thin-walled) and (3) O-Rings for 1809 Fluoride; optional for high alkalinity samples: Orion 1811AO Cation Sodium & 2117XP Chloride
  
181860 T3018-45
ft 6 ft. DIFFUSION TUBING & O-rings (15) small (3) large(RBA) for use on Orion 2118XP Oxygen Scavenger Monitor Package   
181170 F181170-45 PK/2 SWAGELOK SS-4F-K4-60 R4CJ2C001B Filter Element Kit, Stainless Steel, 60micron 

181192     ANNUAL 1811EL SODIUM CONSUMABLES KIT
    
181195 D3045RBA-6L 6x1L/Kit DIPA RETROFIT KIT FOR 1811EL - Retrofit 1811 to 2111 Reagent Bottle Adaptor for DIPA use [includes DIPA and Diffusion Tubing]]
see also 181196 listed as 1800 SERIES SHELF CLAMP FOR REAGENT BOTTLE    
181811 D3018-6L 6x1L Oxygen Scavenger Reagent, f/1818AO-2118XP, with Tubing and O-Rings: 13.1 M Acetic Acid, Iodinated - Safecoat Bottle with 45mm Cap [hydrazine diffusion reagent
  
182011 F5710-6L 6x1L REAGENT(FORMIC) ACID, 6x1L Btl per Case only/NO TUBING for 2117HL/1517/1817HL Chloride & 1820/2120XP Calcium Analyzer(s)
  
211150XP  see A3045XPL-12L 6x2L  Ammonium Hydroxide, ACS  [6x1.87L/CS] in 2L Rect Btl - Packaged with (6) T3058-45 -Diffusion Tubing 5'8"(thin-walled):This product is a direct replacement for the Orion Cat.No.181130 Ammonia Reagent: a component of  211150XP Cation/High Acid Application with 181160 diffusion tubing.:>use with S181140-45 LOW Standard Kit    
          
211153 S181156R-45  Kit Consumables kit for 1 year for 1811LL (Not Using Software Rev9.0)-contains Diisopropylamine reagent 

21LL53 S181158R-45 KIT ANNUAL REAGENTS & CONSUMABLES KIT FOR (DIPA)RETROFIT 1811EL(REV.9)
  
211160XP  A3045XPH-12L     6x2  Ammonium Hydroxide, ACS  [6x1.87L/CS] in 2L Rect Btl-Packaged with (6) T3057-45 -Diffusion Tubing 4' (thick-walled)      
211190 D3045R-6L 6X1L Diisopropylamine, 99%+ Reagent, S.G.0.72, B.P. 83-84C, 800mL Fill in wide mouth Safety Coated Bottle w/Teflon Lined Cap 70-400::: ***Reagent only *** fits Orion 1811 w/2111RBA and 2111LL Analyzer(s).   
211191 D3045-6L   Diisopropylamine 99%+ Reagent f/2111RBA with (6)Sets Diffusion Tubing 4" ($814 Orion) for 2111LL and 1811EL Retrofitted (see also D3045R-6L DIPA ONLY) 

211191 D3045-6L 6X1L Diisopropylamine, 99%+ Reagent, S.G.0.72, B.P. 83-84C, 800mL Fill in wide mouth Safety Coated Bottle w/Teflon Lined Cap 70-400. Includes:Six(6) diffusion tubing kits-T2194-45   
          
211192     Sodium Consumables DIPA Kit
Thermo Orion 211192 Sodium Consumables Kit 

211194 T2194-4512 
Diffusion Tubing Kit (4 inch length [1/8"ODx1/32"Wall]and O-rings(6))   
211194 T2194-4512 
Diffusion Tubing Kit: fits Thermo-Orion Model 2111LL and retrofitted 1811EL - Quickchange Monthly maintenance kit: includes a one year supply of diffusion tubing, 4-inch with o-ring cinch, two(2) each PEEK barbs , and 2 spare o-rings.   

211198 CALL   211198 Diffusion tubing kit for DIPA reagent, 8 inch tubing[designed for low pH samples]   
300051 300051 
Electrolyte Solution Potassium Carbonate 8%, Potasium Bromide 2%, Potassium Hydroxide 1%  Trade secret  0.1%   
900003 P5710-45 2oz. ELECTRODE FILL SOLUTION - Potassium nitrate(KNO3) 10%,  use with H5600C-45 Reference Electrode paired with H2500C-45 Chloride Sensor Electrode   
151111 & 150060 E3057-6L 6x1L ETHYLAMINE, 33% - 6x1L[CARTON ONLY] - for Orion 1811 series, Ships  w/(6) T3057-45 Diffusion Tubing 4 FT Length (thick-walled) and O-Rings(3)   
181192FOR     1811LL (Retrofitted) Annual Kit NO DIPA
  
18LL53 S181158-45 KIT ANNUAL CONSUMABLES KIT FOR ORION 1811EL ANALYZER W/100058/48 ELECTRODE PAIR & MONOETHYLAMINE BUFFER
  
18LL53 FOR     annual 1811EL NO MONOETHYLAMINE
  
211150XP A3045XPH-12L 6X2L Ammonium Hydroxide, ACS  [6x1.87L/CS] in 2L Rect Btl   
Packaged with (6) T3058-45 Diffusion Tubing 5'8" (thin-walled) w/O-Rings Thermo Orion: Model(s) 211150XP Sodium Analyzer Ammonia High Acid Application Package with 181160 diffusion tubing.

  
211160XP A3045XP-12L 6X2L Ammonium Hydroxide, ACS  [6x1.87L/CS] in 2L Rect Btl   
Packaged with (6) T3057-45 -Diffusion Tubing 4' (thick-walled)  Thermo Orion: Model(s) 211160XP Sodium Analyzer Ammonia Application Package with 150060 diffusion tubing.

2111RBA 2111RBA Kit Retrofit 1811 to 2111 Reagent Bottle Adaptor for DIPA use (***CALL FOR PACKAGE PRICE W/DIPA)   
703275-AO1 H1000-45 EA ELECTRODE TO ANALYZER CABLE[HEYCO PG7]::: NOTE***ALL ELECTRODES NOW SHIP WITH A CABLE - A "C" HAS BEEN ADDED SEE H2500C-45--->H5800C-45 

703286-AO1 C1800-45 EA Connector Assembly for Reference Fill to Reference Electrode 

Sensepoint
The Sensepoint range of flammable,
toxic and Oxygen gas detectors offer
users a high quality, low cost solution
to their industrial gas monitoring needs.
The Sensepoint range of flammable, toxic
and Oxygen gas detectors offer users a high
quality, low cost solution to their industrial gas
monitoring needs. Installation in potentially
explosive atmospheres is made by the use of
a suitable Ex d or Ex e approved junction box.
The industry standard outputs from
Sensepoint are connected to either a choice
of Honeywell Analytics’ controllers or 3rd
party DCS/ PLC systems. Both flammable and
toxic versions are certified to the latest ATEX/
IECEx safety and performance standards.
The flammable detector is available in either % LEL
or PPM detection range versions and provides
an industry standard mV bridge output.
Typical life expectancy is greater than 5 years,
after which the detector is simply replaced with a
new one.
The toxic detectors are supplied pre calibrated for
easy installation and provide an industry standard
2 wire 4-20mA loop output. User connections
are Ex d, while front end Intrinsic Safety (IS) design
allows for easy exchange of the replaceable
sensor while powered. IS design also removes
the need for a sinter enabling very fast speed
of response and detection of ‘sticky’ gases such
as Chlorine and Ammonia.
Sensepoint has proven its suitability across a wide
range of demanding applications by delivering high
performance and reliability at an affordable cost.
Fit For Purpose
? Flammable, toxic and Oxygen
versions available
? High performance, low cost
? Suitable for new and retro fit applications
Proven Sensor Technology
? SurecellTM electrochemical sensors
? Poison resistant catalytic bead
? Fast and reliable
? Typical 2 to 5 years operational life
ATEX/IECEx Certified
? Complies with the latest standards
? Hazardous area approval and performance
? IP65/67 for use in harsh environments
Easy to Use
? Factory set operation
? Simple to replace
? Minimal training required
Range of Accessories
? Weatherproof cap
? Flow adaptor
? Duct mounting kit
? Collecting cone
Sensepoint
Installation Details
Dimensions
 Flammable % LEL or PPM Version Toxic or Oxygen Version
Sensepoint flammable and toxic gas detectors are installed using suitable Ex d or Ex e junction boxes.
The standard junction box available from Honeywell Analytics includes an earth continuity plate for
added RFI protection. The detectors have a choice of mounting thread size to match local preferences.
The Sensepoint range of flammable and toxic detectors are designed for use with a wide range
of controllers available from Honeywell Analytics or with 3rd party control equipment accepting
their industry standard output signals.
100mm 100mm
Standard
Junction Box
Standard
Junction Box
Threads available: M20,
Threads available: M20, M25 and ? NPT
M25, M26, ? NPT
(ppm M20 and ? NPT) Serial Number/year of
Manufacture Serial Number/year of
Manufacture
Sensepoint Toxic
Detector Sensepoint Flammable %LEL
or ppm Detector
Filter Filter
Filter Housing Filter Housing
100mm
100mm
56mm
56mm
Ex e/Ex d gland Ex e/Ex d gland
52mm
(across flats)
52mm
(across flats) 74mm
90mm

3 Wire mV Bridge Circuit
Installation Details
Electrical Connections Typical Terminal Connections
3 Wire mV Bridge Circuit
2 Wire 4-20mA (Sink)
Flammable PPM Version
Toxic or Oxygen Version
Flammable % LEL Version
Blue (NS)
Brown (S) White (01)
+VE
-VE
Signal
To Controller
Blue (NS)
Red (S)
Screen
+VE
-VE
Signal
To Controller
Cable Screen
Green (01)
Blue (-)
Red (+)
Screen
Cable Screen
+VE
To Controller
Signal
Technical Specification
NOTES
1
 High temp range version available -55 to +150?C – See separate datasheet DS0303
2
 Over temp range -20 to +55?C
* = % of range (fsd) per year
** Over operating temperature range
*** = % of applied concentration
Gas & Range Flammable
0-100% LEL
Flammable
PPM (Typically
0-10% LEL)
Hydrogen
Sulphide (H2
S)
20/50/100ppm
Carbon
Monoxide (CO)
100/200/500ppm
Ammonia
(NH3
)
50/1000ppm
Chlorine
(Cl2
)
5/15ppm
Oxygen
(O2
)
25% V / V
Hydrogen
(H2
)
1000/10000ppm
Sulfur Dioxide
(SO2
)
15/50ppm
Nitric Oxide
(NO)
100ppm
Nitrogen
Dioxide (NO2
)
10ppm
Operating Temp -40 to +80?C1 -30 to +65?C -25 to +50?C -20 to +50?C -20 to +40?C -20 to +50?C -15 to +40?C
Operating Humidity Continuous: 20 to 90% RH (non-condensing). Intermittent: 10 to 99% RH (non-condensing)
Storage Conditions 0 to 25?C; 30 to 70% RH 0 to 25?C; 30 to 70% RH
Operating Pressure 90 to 110kPa
Warm-up Time < 10 minutes < 20 minutes < 3 minutes < 5 minutes < 3 minutes 12 hours 1 hour
Response Time
T20 < 6 secs < 5 secs – < 10 secs < 3 secs – – < 3 secs < 15 secs
T50 < 5 secs < 15 secs < 12 secs < 10 secs < 20 secs < 5 secs < 10 secs < 10 secs < 5 secs < 30 secs
T90 < 10 secs < 40 secs < 30 secs < 65 secs < 105 secs < 10 secs < 45 secs < 90 secs < 30 secs < 60 secs
Supply 200mA; 0.7W maximum 18 to 30VDC; 0.9W maximum
Signal Output mV bridge Loop powered 4-20mA
Linearity < 5% fsd or ±10% of reading < 5% fsd
Operating Life 5 years (typical) 2 years (typical) 18 months (typical) 1 year (typical) 18 months (typical)
Storage Life Typically, over 5 years when in
original sealed packaging 6 months.
Stability (zero)
with time* < ±3% fsd / yr < ±2% fsd / yr
with temperature** < ±1% fsd2 < ±3% fsd < ±5% fsd < ±6% fsd < ±2% fsd < ±2% fsd < ±5% fsd
with humidity < ±1% fsd < ±10% fsd < ±2% fsd < ±10% fsd < ±2% fsd < ±2% fsd < ±10% fsd
Stability (span)
with time* < ±3% fsd / yr < ±2% fsd / yr < ±4% fsd / yr < ±20% fsd / yr < 10% fsd / yr < ±20% fsd / yr < ±2% fsd / yr
with temperature*** < ±3% fsd < ±8% fsd < ±25% fsd < ±20% fsd < ±20% fsd < 40% fsd < ±10% fsd < ±60% fsd < ±15% fsd < ±25% fsd
with humidity < ±2% fsd < ±10% fsd < ±2% fsd < ±10% fsd < ±2% fsd < ±1% fsd < ±2% fsd < ±10% fsd
Weight 190g 185g 205g 185g
Construc. Materials Polyphenylene Sulphide (PPS)
I.P. (NEMA) Rating IP65 (standard), IP67 (with weather protection fitted)
Certification Details
(ATEX/ IECEx)
 II 2 GD Ex d IIC Gb T85oC
Tamb -40oC to +55oC
 II 2 GD Ex d IIC Gb T100oC
Tamb -40oC to +70oC
 II 2 GD Ex d IIC Gb T135oC
Tamb -40oC to +80oC
 tb IIIC A21 Db IP67
Baseefa08ATEX0265X
IECEx BAS08.0068X
 II 2 GD Ex d ia IIC T4 Gb Tamb -40oC to +65oC
 tb IIIC A21 IP67 T135oC Db
Baseefa08ATEX0263X
IECEx BAS08.0070X
Other Certifications Russian: GOST
Applicable
Standards This product complies with the relevant CE standards including: EMC to EN50270, Flammable sensor to EN60079-29-1
Spares
2106B1545 O2
 Electrochemical Cell Exchange Kit
2106B1546 SO2
 Electrochemical Cell Exchange Kit
2106B1547 Cl2
 Electrochemical Cell Exchange Kit
2106B1548 CO Electrochemical Cell Exchange Kit
2106B1549 H2
S Electrochemical Cell Exchange Kit
2106B1594 NO Electrochemical Cell Exchange Kit
2106B1595 NH3
 0-1000ppm Electrochemical Cell Exchange Kit
2106B1596 NH3
 0-50ppm Electrochemical Cell Exchange Kit
2106B1597 H2
 0-1000ppm Electrochemical Cell Exchange Kit
2106B1598 H2
 0-10000ppm Electrochemical Exchange Kit
2106B1599 NO2
 0-10ppm Electrochemical Exchange Kit
Calibration Equipment
Contact your local Honeywell Analytics representative
for details of suitable calibration equipment
Accessories
00780-A-0100 Term Hsg – Bartec DE1155 With Continuity Plate
1 x 25mm – 3 x 20mm Entries – ATEX Approved
00780-A-0160 Right Angle Mounting Bracket For Ceiling Mounting
02000-A-1635 Series 2000 Weather Housing Use With Toxic Sensor
02000-A-1640 Series 2000 Weather Housing use With Flammable Sensor
02000-A-1642 Series 2000 Collecting Cone Use With Flammable Sensor
02000-A-1645 Series 2000 Calibration Flow Housing Assembly (Flam and Toxic)
02000-A-3120 Series 2000 Flow Housing Assembly Plastic
2106B1110 Catalytic Bridge To 4-20mA Converter
2106B2114 Toxic Calibration Kit including Calibration Cover,
Removal Tool, Potentiometer Adjustment Tool
2106D2055 M36 / M40 Thread Adaptor
225-262-138 Cable Gland And Caps, 20mm, Nylon